Видео

Hello! Fellow Vanlifer! I built vans while you where diving, now when I learned to dive you got a van ahha. So you ever store your diving gear in the van? If so how?

Thank you for the video and all your comprehensive information on BCD failure and a proper weighting.

How much

i bought this 5 years ago,,,, i did not use it ye🎉, do u recon i can still use it in the future....i have xtx50 sidemount set also, is it ok for tec diving?i dnt do caves i just like sidemount set up for long dives on shores

Nice vid dude! Could you do a comparison sometime of all the "Jetfins" out there? i have a pair of Taiwan made Shark Jet Fins distributed by Halcyon here in Auz (by Reel Dive.se in EU), then there's Aropec's and ScubaPro's Taiwan fins too, then the rest. Rhetorically speaking aren't we just paying for a name when SHARK and AROPEC's are identical to ScubaPro's. Probably the same factory!?

My joints was aching badly Bc of job defarmation. Ty for this ting ❤

Ive only used Jet fins. Was wondering why I kept sinking😂

Prominent

Went through OW and never even talked about weights. How does one learn this stuff?

Very cool video

Great music choice

nice

Well done guys some darn great info!

Is there a specific way how you put the Marigold gloves on the Santi dry glove system? I'd like to do the same.

One thing you didn’t show in the video is that you can unclip both tanks from the back (but still have shoulder strap on them) and hold them out in front, Superman style

Seawater or freshwater? Drysuit and wetsuit scenarios?

Have you a break down of a helicopter turn?

Transmitters (Swift) + drysuit heating (Santi) don't works together well. Heating is jamming transmission and you are loosing signal from both sides the moment you turn on the heating.

Amazing video!

where this is tested? in red sea the water is so salty, so can change the bouyancy. would be interesting to know the place where these fins have been tested to have an index reference.

🔥🔥🔥🔥🔥🔥🔥🔥🔥💯❤️

I have a apeks xt50 sidemount and wsx 25. Rk3 fin .a d6i novo computer. Is it good equilment fkr the course? Where are yoh based hoq long is the course duration for visa purpouses

Great video should be shown to new divers.

Thoughtful design! Really cool stuff

Very nice build 🥰

Are the CV joints in good condition? Basically; do you hear any woodpecker type noises from a front wheel in a bend?

Grea stuff. Very informative (and fun to watch too)

Great video. Finally understand…. Thanks so much for producing such informative video… sharing this video with my friends

Do you offer some kind of certification?

A version with narration would do well I think. Even if it was AI.

Thank you for all the information. It's really so nice to learn from you what my PADI open and advance did not teach me. I find it so horrible that the instructors did not teach us anything about weights and buoancy during any of the courses and the dives, they just gives the weights approximative and the we struggle during every freaking dive on our own , either we are too positive or too negative , now that I understand the principle and the importance of the weight check , i will insist before every dive to check my weights every time. I freaking go on trips and pay too much to those people and they don't even bother checking any of that. Once I was diving with 7kgs , another time with 5 kgs, another time 6.2 kgs. My last 10 dives were at 6.2kgs with a jacket style BCD (cressi travellight) 1mm rashguard , I'm 6' weigh 200 lbs . Thanks again , I love your informative rich videos. Regards. Mike.

Hi have you ever seen somebody dives with carbon fiber aluminum cilinders? I received a buoyancy table from carbondive, Austria and I'm thinking about to dive with this tuxing 6.8L China cilinder. We dive maximum 15 m. Normally 5 to 10

I am using a sidemount SCR. If I follow this process and just add the weight (measured in the water) of my SCR configuration (with backplate and harness plus accessories) in the equation, I guess it should work? However, I doubt I would ever be at 50 bars in both Nitrox tanks at the end of a dive.

Thanks, Steve! I'm AOW beginner, watch you, I'm learning English due to your slow and understandable speeches 😊

Showa 727 are also great and available in a size which you can use with the Santi heated undergloves. The only thing: they are just a little to thin to fit waterproof on the rings, so just double the part which is being locked by the O-ring and your fine.

Great video. Super informative!

Hi Steve. What hose loop covers are you using on your ccr?

Where can I buy a moving D-ring?

I love my new Razor ❤ What I changed afger so.e dives, is the webbing, its to stiff and hurts imo. I changed it into halcyon webbing. I also changed the new buckle system bc I kept struggeling to let it slide proper with my hands.

can you show how did you attach it to the rebreather ?

Sidemount 🙄 🙄 🙄

I appreciate it. This video has been very helpful to me

Just a beautiful video explained everything so nicely. ❤ Thks

I’ve been considering switching to fixed d-rings in the shoulders to make clipping more consistent. I haven’t tried the sliding d-rings yet. It seemed like it would be more to fiddle with with, but I do find myself between a cheap 3mil in the Caribbean and a drysuit other times.

Very helpful I just switched to sidemount and doing everything by myself to the lack of quality training in my area I'd love to do the course with you Are you by chance coming to the Costa Brava to teach this year? I would join your course for sure

I came in feeling confident with my setup but leaving questioning everything I've learnt, including my fat arse bent d-ring 🥲

Remember the first time with my XDeep with Vas, I got back home with a bag full of d-rings, clips and other stuff we either removed or replaced for better options. Still love the modifications we have done, also the ones the second time over for the butt d-ring on xdeep.

Appreciate your video due the lack of detailed setup informations which goes beyond sidemount corses. I will hit the subscibe button. Best regards from Germany.

Great video and great way to understand the path, the difficulties and the hard work mandatory for cave diving in the appropriate way.

Hello from Seattle in the Pacific North West. Recently we have has some colder water temps especially in our lakes. Not as cold as other places but my references is diving in waters between 37 - 44 F (2.78 - 6.67 C). I am not interested in active heating at this time. So I literally just picked up the new to market (released November 2023) Fourth Element HALO A°R gloves, yes on the bulky side. From Grainger our US industrial supply supplier I found only one pair of exterior gloves that fit and they are size 3XL (My new Halo goes are Large). Unfortunately the chemical gloves I found are cotton lined and even after purchasing a Santi SmartGlove kit I am not at all impressed with how easy the glove slips off the ring with the cotton lining. They are also very thick and rigid no bueno for dexterity. I would prefer to do the pull over method as I have shown in my video here: ruclips.net/video/4LIhFkF765U/видео.html however I just got the Santi SmartGloves ring system so that is sill an option. I am open to any tips if any one has sourced a good fitting all rubber chemical glove in 3XL size. Cheers, #SeattleRingHunter